Sunday, October 31, 2010
Saturday, October 30, 2010
Pretty Big Difference
FBI In 2009, an estimated 1,318,398 violent crimes occurred nationwide
DOJ IN 2009, an estimated 4,300,000 violent crimes occured nationwide
Only 49% of violent crimes reported to police, so there are nearly a million reported violent crimes that do not reflect in the FBI UCR, as not all Police depts. send reports to the FBI
DOJ IN 2009, an estimated 4,300,000 violent crimes occured nationwide
Only 49% of violent crimes reported to police, so there are nearly a million reported violent crimes that do not reflect in the FBI UCR, as not all Police depts. send reports to the FBI
Friday, October 29, 2010
Bullying
Say Uncle has a post
Really the best way to stop bullying is well placed set of knuckles to the adams apple, or a quick knee strike to the groin. If you are the target of a bully grow a pair and yes hit back, at that age they understand force do not be a sniveling little whiner that wants someone else to fix it for them, unless you want to be a sniveling little whiner all of your life.
Really the best way to stop bullying is well placed set of knuckles to the adams apple, or a quick knee strike to the groin. If you are the target of a bully grow a pair and yes hit back, at that age they understand force do not be a sniveling little whiner that wants someone else to fix it for them, unless you want to be a sniveling little whiner all of your life.
Like word games?
Like to shoot?
Then I have the book for you:
The Shooters Crossword Puzzle & Word Search Book
link fixed
Then I have the book for you:
The Shooters Crossword Puzzle & Word Search Book
link fixed
Glenn Beck Carries
John Lott has the video
Mike Blooming idiot says felons will be able to get CCW licenses, they must have a really poor system in NY for conducting background checks, in Ohio we are seeing applications revoked for 20 to 30 year old misdemeanors, and NY won't be able to stop felons?
Mike Blooming idiot says felons will be able to get CCW licenses, they must have a really poor system in NY for conducting background checks, in Ohio we are seeing applications revoked for 20 to 30 year old misdemeanors, and NY won't be able to stop felons?
There is an election coming up
In Ohio for the Attorney Generals Office
Richard Condray, the Democrat has been doing a pretty good job for CCW, and gun owners
Mike Devine, the RINO, has never been a friend, oh he says he is when he gets the runs, but once elected is a turncoat.
I didn't vote for Condray the first time, as I didn't trust him, but he has done the job, I will vote for him Nov 2nd.
Richard Condray, the Democrat has been doing a pretty good job for CCW, and gun owners
Mike Devine, the RINO, has never been a friend, oh he says he is when he gets the runs, but once elected is a turncoat.
I didn't vote for Condray the first time, as I didn't trust him, but he has done the job, I will vote for him Nov 2nd.
Thursday, October 28, 2010
Wednesday, October 27, 2010
Fixed thanks
Have a PC issue
I had an audio CD grenade itself inside the drive, and while it appears most but not all the shrapnel, is out the drive, the drive does not seem to work.
Removed the power supply, and attempted to slide drive out, but after a couple of inches, it won't budge, although rapping it a couple of times with the butt of the screw driver did move it another 3/4's of an inch it was tighter than a beagle in a rabbit hole.
Couldn't see any clips screws or anything impeding removal, but didn't want to go Banzai on it
Also tried pushing out the front, and won't go that way ether, and yes the spring loaded clip that holds it in place, I did release it.
It a Compaq Presario SR5410F
The front cover had to come off was blocking one corner of drive
I had an audio CD grenade itself inside the drive, and while it appears most but not all the shrapnel, is out the drive, the drive does not seem to work.
Removed the power supply, and attempted to slide drive out, but after a couple of inches, it won't budge, although rapping it a couple of times with the butt of the screw driver did move it another 3/4's of an inch it was tighter than a beagle in a rabbit hole.
Couldn't see any clips screws or anything impeding removal, but didn't want to go Banzai on it
Also tried pushing out the front, and won't go that way ether, and yes the spring loaded clip that holds it in place, I did release it.
It a Compaq Presario SR5410F
The front cover had to come off was blocking one corner of drive
Tuesday, October 26, 2010
Monday, October 25, 2010
Gen 4 Glock
Note from the weekend,
One of the students picked up a Gen 4 Glock Thursday, and brought it to class.
I usually do not recommend bringing a new gun to class, but anyway, it was the only one he brought, and it was having problems from the get go, early in the day he( the student) being a Glock Armorer decided to diassemble the pistol, and a few smaller parts lauched themselves into the unknown, the extractor had to be forced out of the slide, and the Glock went home in a bag.
He finished the day with my Pro Series Smith M&P
Hope for Glock it was just a fluke
One of the students picked up a Gen 4 Glock Thursday, and brought it to class.
I usually do not recommend bringing a new gun to class, but anyway, it was the only one he brought, and it was having problems from the get go, early in the day he( the student) being a Glock Armorer decided to diassemble the pistol, and a few smaller parts lauched themselves into the unknown, the extractor had to be forced out of the slide, and the Glock went home in a bag.
He finished the day with my Pro Series Smith M&P
Hope for Glock it was just a fluke
Been Busy
Had a fairly large Utah CCW class friday, and over the weekend launched our new advance handgun course, 18 students, and it was a demanding course at least for the RO's.
Back to regular blogging tomorrow
Back to regular blogging tomorrow
Sunday, October 24, 2010
Saturday, October 23, 2010
Friday, October 22, 2010
Thursday, October 21, 2010
From Action Target
Weapon Clearing
There is no shortage of techniques for clearing a stoppage or malfunction; just trying to explain the difference between the two sets off a never ending debate. Unfortunately, those who have time to engage in never ending debates lose track of what is important. You’re fighting for your life. Whatever works is what is important.
Stoppages usually occur in the cycle of operation of the semiautomatic pistol or rifle, usually caused by a dirty, un-lubricated weapon, bad magazines (covered in a previous article) under powered ammunition, poor grip (including unlocking the wrist while shooting). There are other contributing factors, but these are the primary ones.
A malfunction relates to a mechanically broken weapon that usually cannot be fixed on short notice. I would like to deal with the stoppage techniques in this article.
First, prevention or at least steps we can take to prevent this from happening are important, but please keep in mind there are no guarantees. It is hard to believe that in 2010 the primary cause of stoppages is still dirty, un-lubricated firearms. With all the training and preaching about the importance of cleaning and maintaining our weapons systems many of our fellow officers continue to not take this seriously. A properly maintained and lubricated firearm following the manufacturer’s guidelines is as important to you and those that rely on you as understanding sound tactics and techniques to survive a firefight on the street.
Every time a firearm is taken apart, cleaned, lubricated, and put back together, you should perform a function check. Often at the beginning of a training class I will have the students unload, make the weapon safe and perform a function check. I am often surprised by the number of officers that have been “trained” and carrying the firearm for some time that still do not know how to properly perform a function check on their side arm or a shoulder mounted weapon they may be using. While specific firearms require specific manipulation for a weapon-specific function check, general guidelines for a function check will be covered in a later article.
Inspection of duty ammo as we load our magazines is as equally important. The primary objective is to keep our weapons at peak operational readiness so when we draw the firearm we are confident it will go BANG! (Preventative maintenance guide coming soon.)
So, let’s move on to some more terms such as slide forward, slide to the rear, primary stoppage, secondary stoppage, etc. Slide (or bolt on a semi-automatic rifle or shotgun) forward means that the slide or bolt is all the way forward in the normal locked (firing) position but the weapon did not go BANG! Slide (or bolt) to the rear means that the slide is locked to the rearward position. Primary stoppage means that when you pressed the trigger you heard or felt a hammer / striker fall. Secondary stoppage means that when you pressed he trigger you did not hear or feel a hammer / striker fall.
First, if you have to press the trigger and the weapon doesn’t go “BANG!”, your first immediate action is to MOVE!, preferably toward cover, but if none is available, remember that a moving target is harder to hit than a stationary one.
Reload:
If the indicators are:
(1) Slide or bolt locked to the rear, AND
(2) no hammer or striker fall, chances are that the weapon is empty and needs to be reloaded.
The fix is to reload the weapon and get back into the fight! Sounds simple enough, but how many times have you seen in training shooters; (a) catch an empty magazine, (b) place an empty magazine in a pocket, etc.? If you need to continue shooting, the most important thing is to get the fresh magazine into the weapon and chamber a round. The empty magazine is worthless!
Also, some shooters practice the method of pointing the muzzle of the semiautomatic pistol straight up and flipping it in their hand so the magazine well points out at a ninety degree angle. The theory is that you can see the opening of the magazine well out of your peripheral vision or “combat window” and are less likely to fumble a reload. I can’t say that I’m a big fan of this technique, as pointing the muzzle straight up on a semiautomatic pistol with the slide locked to the rear tells the whole world (including, possibly, your assailant(s)) that YOU’RE EMPTY. I’ve also seen shooters that get the steps wrong and flip the pistol to the ninety degree angle before pressing the magazine release, and then wonder why the magazine doesn’t fall out. (Sir Isaac Newton figured this out a few centuries ago.) I prefer to keep the muzzle pointed at the threat / threat area with the magazine well pointed down while executing the reload.
Primary Method of Stoppage Clearing:
If the indicators are:
(1) Slide or bolt forward, AND
(2) hammer or striker fall, your primary method of immediate action is to:
(a) TAP and TUG on the magazine to make sure it is seated;
(b) RACK the slide or bolt,
(c) READY.
All of this should happen as you are moving and the weapon is still up, pointed toward to threat or threat area. With a semi-automatic pistol, a good “par time” for a tap, rack, ready is about 1.0 – 1.5 seconds. With a semiautomatic rifle, about 1.5 seconds. Dipping the muzzle toward the ground and staring at the weapon does nothing except alert your assailant(s) that you are out of the fight.
Secondary Method of Stoppage Clearing:
If the indicators are:
(1) Slide or bolt locked to the rear, AND
(2) no hammer or striker fall, AND
(3) When you press the magazine release, the magazine does not fall out of the weapon, you may have a failure to extract combined with a failure to feed, also known as a “double feed”. We refer to it as a “secondary stoppage”.
The traditional steps to correct this have been:
(a) LOCK the slide / bolt to the rear,
(b) RIP the magazine out,
(c) RACK the slide / bolt to clear the chamber, then
(d) TAP a new magazine into place,
(e) RACK the slide / bolt and
(f) READY.
That’s a lot of moving parts to memorize, and under low stress on the range we’ve seen a lot of shooters get the steps out of order, making the stoppage even worse.
We’ve simplified this “secondary method” into three steps that are more easily remembered under stress:
(a) UNLOAD the weapon, which usually means removing the
magazine, sometimes forcefully;
(b) CLEAR THE CHAMBER (I prefer a physical check with a fingertip
as opposed to a visual check, which assumes that you will have
sufficient light to see the chamber);
(c) RELOAD the weapon, preferably with a fresh magazine, as a faulty
magazine may have caused the stoppage in the first place.
To recap, the best way to minimize the need for stoppage clearing is to:
(a) Have your weapons clean and properly lubricated;
(b) Function test all of your magazines;
(c) Make certain that all of the cartridges in the magazines are
defect-free.
That being said, practice your stoppage drills. You can do them in any safe area that allows movement and has simulated cover. Make certain to remove all live rounds from the area and use only inert training cartridges.
There is no shortage of techniques for clearing a stoppage or malfunction; just trying to explain the difference between the two sets off a never ending debate. Unfortunately, those who have time to engage in never ending debates lose track of what is important. You’re fighting for your life. Whatever works is what is important.
Stoppages usually occur in the cycle of operation of the semiautomatic pistol or rifle, usually caused by a dirty, un-lubricated weapon, bad magazines (covered in a previous article) under powered ammunition, poor grip (including unlocking the wrist while shooting). There are other contributing factors, but these are the primary ones.
A malfunction relates to a mechanically broken weapon that usually cannot be fixed on short notice. I would like to deal with the stoppage techniques in this article.
First, prevention or at least steps we can take to prevent this from happening are important, but please keep in mind there are no guarantees. It is hard to believe that in 2010 the primary cause of stoppages is still dirty, un-lubricated firearms. With all the training and preaching about the importance of cleaning and maintaining our weapons systems many of our fellow officers continue to not take this seriously. A properly maintained and lubricated firearm following the manufacturer’s guidelines is as important to you and those that rely on you as understanding sound tactics and techniques to survive a firefight on the street.
Every time a firearm is taken apart, cleaned, lubricated, and put back together, you should perform a function check. Often at the beginning of a training class I will have the students unload, make the weapon safe and perform a function check. I am often surprised by the number of officers that have been “trained” and carrying the firearm for some time that still do not know how to properly perform a function check on their side arm or a shoulder mounted weapon they may be using. While specific firearms require specific manipulation for a weapon-specific function check, general guidelines for a function check will be covered in a later article.
Inspection of duty ammo as we load our magazines is as equally important. The primary objective is to keep our weapons at peak operational readiness so when we draw the firearm we are confident it will go BANG! (Preventative maintenance guide coming soon.)
So, let’s move on to some more terms such as slide forward, slide to the rear, primary stoppage, secondary stoppage, etc. Slide (or bolt on a semi-automatic rifle or shotgun) forward means that the slide or bolt is all the way forward in the normal locked (firing) position but the weapon did not go BANG! Slide (or bolt) to the rear means that the slide is locked to the rearward position. Primary stoppage means that when you pressed the trigger you heard or felt a hammer / striker fall. Secondary stoppage means that when you pressed he trigger you did not hear or feel a hammer / striker fall.
First, if you have to press the trigger and the weapon doesn’t go “BANG!”, your first immediate action is to MOVE!, preferably toward cover, but if none is available, remember that a moving target is harder to hit than a stationary one.
Reload:
If the indicators are:
(1) Slide or bolt locked to the rear, AND
(2) no hammer or striker fall, chances are that the weapon is empty and needs to be reloaded.
The fix is to reload the weapon and get back into the fight! Sounds simple enough, but how many times have you seen in training shooters; (a) catch an empty magazine, (b) place an empty magazine in a pocket, etc.? If you need to continue shooting, the most important thing is to get the fresh magazine into the weapon and chamber a round. The empty magazine is worthless!
Also, some shooters practice the method of pointing the muzzle of the semiautomatic pistol straight up and flipping it in their hand so the magazine well points out at a ninety degree angle. The theory is that you can see the opening of the magazine well out of your peripheral vision or “combat window” and are less likely to fumble a reload. I can’t say that I’m a big fan of this technique, as pointing the muzzle straight up on a semiautomatic pistol with the slide locked to the rear tells the whole world (including, possibly, your assailant(s)) that YOU’RE EMPTY. I’ve also seen shooters that get the steps wrong and flip the pistol to the ninety degree angle before pressing the magazine release, and then wonder why the magazine doesn’t fall out. (Sir Isaac Newton figured this out a few centuries ago.) I prefer to keep the muzzle pointed at the threat / threat area with the magazine well pointed down while executing the reload.
Primary Method of Stoppage Clearing:
If the indicators are:
(1) Slide or bolt forward, AND
(2) hammer or striker fall, your primary method of immediate action is to:
(a) TAP and TUG on the magazine to make sure it is seated;
(b) RACK the slide or bolt,
(c) READY.
All of this should happen as you are moving and the weapon is still up, pointed toward to threat or threat area. With a semi-automatic pistol, a good “par time” for a tap, rack, ready is about 1.0 – 1.5 seconds. With a semiautomatic rifle, about 1.5 seconds. Dipping the muzzle toward the ground and staring at the weapon does nothing except alert your assailant(s) that you are out of the fight.
Secondary Method of Stoppage Clearing:
If the indicators are:
(1) Slide or bolt locked to the rear, AND
(2) no hammer or striker fall, AND
(3) When you press the magazine release, the magazine does not fall out of the weapon, you may have a failure to extract combined with a failure to feed, also known as a “double feed”. We refer to it as a “secondary stoppage”.
The traditional steps to correct this have been:
(a) LOCK the slide / bolt to the rear,
(b) RIP the magazine out,
(c) RACK the slide / bolt to clear the chamber, then
(d) TAP a new magazine into place,
(e) RACK the slide / bolt and
(f) READY.
That’s a lot of moving parts to memorize, and under low stress on the range we’ve seen a lot of shooters get the steps out of order, making the stoppage even worse.
We’ve simplified this “secondary method” into three steps that are more easily remembered under stress:
(a) UNLOAD the weapon, which usually means removing the
magazine, sometimes forcefully;
(b) CLEAR THE CHAMBER (I prefer a physical check with a fingertip
as opposed to a visual check, which assumes that you will have
sufficient light to see the chamber);
(c) RELOAD the weapon, preferably with a fresh magazine, as a faulty
magazine may have caused the stoppage in the first place.
To recap, the best way to minimize the need for stoppage clearing is to:
(a) Have your weapons clean and properly lubricated;
(b) Function test all of your magazines;
(c) Make certain that all of the cartridges in the magazines are
defect-free.
That being said, practice your stoppage drills. You can do them in any safe area that allows movement and has simulated cover. Make certain to remove all live rounds from the area and use only inert training cartridges.
Comfort levels
There have been a few posts, about tactical clothing, mall ninjas of late.
To note, I wear em all the time, the main reason being they are comfortable.
While not a big fan of 5:11 other than their shirts, I detest their pants, but really like the Tru-Spec 24/7 pants, and nearly always wear one of those what many call the "shoot me first vest", although most days when I'm out and about, I get asked questions like: "Can you tell where the paint dept is?", or "where is the restroom?" With so many companies putting the employees in vests, in general they are nearly main stream.
Years ago I made a good percentage of my living do freelance Automotive photography, mostly autos like Monster Trucks, Pulling trucks, 4x4's, , and many a time found my self climbing over, around, and onto said subjects.
Jeans were pretty binding, and it was about the time bugle boys, & dockers came out, and hey back then only photographers wore the vest (I have an old Domeke hanging in the closet thats right at 25 years old) But they were a lot more comfortable, but the quality wasn't there.
So thats the way I dress, I'm to old to look tactfully cool, and not fat enough to be a mall ninja, I'm just being comfortable
To note, I wear em all the time, the main reason being they are comfortable.
While not a big fan of 5:11 other than their shirts, I detest their pants, but really like the Tru-Spec 24/7 pants, and nearly always wear one of those what many call the "shoot me first vest", although most days when I'm out and about, I get asked questions like: "Can you tell where the paint dept is?", or "where is the restroom?" With so many companies putting the employees in vests, in general they are nearly main stream.
Years ago I made a good percentage of my living do freelance Automotive photography, mostly autos like Monster Trucks, Pulling trucks, 4x4's, , and many a time found my self climbing over, around, and onto said subjects.
Jeans were pretty binding, and it was about the time bugle boys, & dockers came out, and hey back then only photographers wore the vest (I have an old Domeke hanging in the closet thats right at 25 years old) But they were a lot more comfortable, but the quality wasn't there.
So thats the way I dress, I'm to old to look tactfully cool, and not fat enough to be a mall ninja, I'm just being comfortable
Wednesday, October 20, 2010
You might be a zombie if:
A dismal appearance: Generally, most zombie clothing is simply what the person was wearing when he was alive, just more raggedy.
Bouts with insomnia: Zombies often stay up for days lurching for brains.
Changes in mobility: Zombies lack coordination and move with a slow, shambling gait.
Difficulties in communication: Most zombies are lousy conversationalists and their comments are generally limited to grunts and moans -- if the lungs are even intact.
General skin decomposition, including small outbreaks of flesh-eating bacteria and parasites in the early stages of zombification.
Little or no emotional baggage: Austin said this is one of the few benefits of being a zombie, but he says having no concept of right and wrong may result in sudden behavioral changes.
Little or no memory.
Bulletproof from the neck down.
A sudden craving for brains.
You recently died.
New guide book published
Bouts with insomnia: Zombies often stay up for days lurching for brains.
Changes in mobility: Zombies lack coordination and move with a slow, shambling gait.
Difficulties in communication: Most zombies are lousy conversationalists and their comments are generally limited to grunts and moans -- if the lungs are even intact.
General skin decomposition, including small outbreaks of flesh-eating bacteria and parasites in the early stages of zombification.
Little or no emotional baggage: Austin said this is one of the few benefits of being a zombie, but he says having no concept of right and wrong may result in sudden behavioral changes.
Little or no memory.
Bulletproof from the neck down.
A sudden craving for brains.
You recently died.
New guide book published
Tuesday, October 19, 2010
Bar Stool Economics
Suppose that every day, ten men go out for beer and the bill for all ten
comes to $100 and if they paid their bill the way we pay our taxes, it would
go something like this:
The first four men (the poorest) would pay nothing.
The fifth would pay $1.
The sixth would pay $3.
The seventh would pay $7.
The eighth would pay $12.
The ninth would pay $18.
The tenth man (the richest) would pay $59.)
So, that's what they decided to do.
The ten men drank in the bar every day and seemed quite happy with the
arrangement, until one day, the owner threw them a curve. "Since you are all
such good customers," he said, "I'm going to reduce the cost of your daily
beer by $20."
So drinks for the ten now cost just $80.
The group still wanted to pay their bill the way we pay our taxes so the
first four men were unaffected. They would still drink for free...but what
about the other six men - the paying customers? How could they divide the
$20 windfall so that everyone would get his 'fair share?'. They realized
that $20 divided by six is $3.33. But if they subtracted that from
everybody's share, then the fifth man and the sixth man would each end up
being paid to drink his beer.
So, the bar owner suggested that it would be fair to reduce each man's bill
by roughly the same amount, and he proceeded to work out the amounts each
should pay. And so:
he fifth man, like the first four, now paid nothing (100% savings).
The sixth now paid $2 instead of $3 (33%savings).
The seventh now pay $5 instead of $7 (28%savings).
The eighth now paid $9 instead of $12 (25% savings).
The ninth now paid $14 instead of $18 (22% savings).
The tenth now paid $49 instead of $59 (16% savings).
Each of the six was better off than before...and the first four continued to
drink for free. But once outside the restaurant, the men began to compare
their savings.
"I only got a dollar out of the $20,"declared the sixth man. He pointed to
the tenth man," but he got $10!"
"Yeah, that's right," exclaimed the fifth man. "I only saved a dollar, too.
It's unfair that he got ten times more than I!"
"That's true!!" shouted the seventh man. "Why should he get $10 back when I
got only two? The wealthy get all the breaks!"
"Wait a minute," yelled the first four men in unison. "We didn't get
anything at all. The system exploits the poor!"
The nine men surrounded the tenth and beat him up.
The next night the tenth man didn't show up for drinks, so the nine sat down
and had beers without him. But when it came time to pay the bill, they
discovered something important. They didn't have enough money between all of
them for even half of the bill!
And that, ladies and gentlemen, journalists and college professors, is how
our tax system works. The people who pay the highest taxes get the most
benefit from a tax reduction. Tax them too much, attack them for being
wealthy, and they
just may not show up anymore. In fact, they might start drinking overseas
where the atmosphere is somewhat friendlier.
David R. Kamerschen, Ph.D.
Professor of Economics
University of Georgia
For those who understand, no explanation is needed..
For those who do not understand, no explanation is possible.
comes to $100 and if they paid their bill the way we pay our taxes, it would
go something like this:
The first four men (the poorest) would pay nothing.
The fifth would pay $1.
The sixth would pay $3.
The seventh would pay $7.
The eighth would pay $12.
The ninth would pay $18.
The tenth man (the richest) would pay $59.)
So, that's what they decided to do.
The ten men drank in the bar every day and seemed quite happy with the
arrangement, until one day, the owner threw them a curve. "Since you are all
such good customers," he said, "I'm going to reduce the cost of your daily
beer by $20."
So drinks for the ten now cost just $80.
The group still wanted to pay their bill the way we pay our taxes so the
first four men were unaffected. They would still drink for free...but what
about the other six men - the paying customers? How could they divide the
$20 windfall so that everyone would get his 'fair share?'. They realized
that $20 divided by six is $3.33. But if they subtracted that from
everybody's share, then the fifth man and the sixth man would each end up
being paid to drink his beer.
So, the bar owner suggested that it would be fair to reduce each man's bill
by roughly the same amount, and he proceeded to work out the amounts each
should pay. And so:
he fifth man, like the first four, now paid nothing (100% savings).
The sixth now paid $2 instead of $3 (33%savings).
The seventh now pay $5 instead of $7 (28%savings).
The eighth now paid $9 instead of $12 (25% savings).
The ninth now paid $14 instead of $18 (22% savings).
The tenth now paid $49 instead of $59 (16% savings).
Each of the six was better off than before...and the first four continued to
drink for free. But once outside the restaurant, the men began to compare
their savings.
"I only got a dollar out of the $20,"declared the sixth man. He pointed to
the tenth man," but he got $10!"
"Yeah, that's right," exclaimed the fifth man. "I only saved a dollar, too.
It's unfair that he got ten times more than I!"
"That's true!!" shouted the seventh man. "Why should he get $10 back when I
got only two? The wealthy get all the breaks!"
"Wait a minute," yelled the first four men in unison. "We didn't get
anything at all. The system exploits the poor!"
The nine men surrounded the tenth and beat him up.
The next night the tenth man didn't show up for drinks, so the nine sat down
and had beers without him. But when it came time to pay the bill, they
discovered something important. They didn't have enough money between all of
them for even half of the bill!
And that, ladies and gentlemen, journalists and college professors, is how
our tax system works. The people who pay the highest taxes get the most
benefit from a tax reduction. Tax them too much, attack them for being
wealthy, and they
just may not show up anymore. In fact, they might start drinking overseas
where the atmosphere is somewhat friendlier.
David R. Kamerschen, Ph.D.
Professor of Economics
University of Georgia
For those who understand, no explanation is needed..
For those who do not understand, no explanation is possible.
Better to have it, and not need it
Than need it and not have it
The North Hollywood Police only needed rifles on one day
But just because they have them does not mean they have to use them everyday
The North Hollywood Police only needed rifles on one day
But just because they have them does not mean they have to use them everyday
Monday, October 18, 2010
Booger Hook on Bang Switch?
If you rack the slide, and have the trigger engaged, that can happen
Bet that got everybodys attention
Bet that got everybodys attention
Sunday, October 17, 2010
Saturday, October 16, 2010
Did I read that right?
An "active shooter" in the room for 3 minutes, before the SWAT team entered?, all the "students" would have been dead.
There is a big difference between a subject that takes hostages, and an active shooter, The barricade subject wants something, an active shooter is there to kill
There is a big difference between a subject that takes hostages, and an active shooter, The barricade subject wants something, an active shooter is there to kill
Is Arsenal the
Buzz word ?
I highly doubt the Tech 9 was converted to be a machine gun, and the air soft were thrown in for affect
I highly doubt the Tech 9 was converted to be a machine gun, and the air soft were thrown in for affect
Friday, October 15, 2010
Including automatic and semiautomatic??
Machine guns
NYPD trains for Mumbai style attack, seems training on common type rifles would be beneficial, (AR's, AK's, Mini 14's) for the beat cops, that might encounter a "battlefield" pick up
NYPD trains for Mumbai style attack, seems training on common type rifles would be beneficial, (AR's, AK's, Mini 14's) for the beat cops, that might encounter a "battlefield" pick up
It usually takes violence
to stop violence, works a lot better than begging and pleading.
Shooting of a spree killer, ether by their own hand or someone elses stops the killing
Shooting of a spree killer, ether by their own hand or someone elses stops the killing
No Clue
Celebs with guns, sends a poor message, of safe gun handling, booger hooks on bang switches throughout, unsafe direction, sad they couldn't get it right, they are trying to look all cool, and come out clueless
Thursday, October 14, 2010
Thats Good News!!
Governors Race Tightening
Strickland has been 100% pro gun, and Kasich has been wishy washy on gun rights.
Strickland has been 100% pro gun, and Kasich has been wishy washy on gun rights.
Strange indeed
Tam comments on a strange occurrence
Of course it figures, my car suddenly quit starting last Friday, and my mechanic friend could only make it over last night, but he braved the lightening and rain, and found the starter had just given up, which is a bit strange, as they usually give some sign before they die. Hopefully he can install the new one this weekend.
Of course it figures, my car suddenly quit starting last Friday, and my mechanic friend could only make it over last night, but he braved the lightening and rain, and found the starter had just given up, which is a bit strange, as they usually give some sign before they die. Hopefully he can install the new one this weekend.
They haven't given up
They just know a frontal attack is suicidal
I was once told, "You can take the spots off a a dalmation, but you'll still have a barking dog"
I was once told, "You can take the spots off a a dalmation, but you'll still have a barking dog"
Well it would depend on the felony
If you took a car when you were 18, for a joy ride, thats a felony. If thats the only thing on your record, why not have your rights restored?
Knew of a Major in the Air Force, that was denied a CCW license, because when he was 18 he had stolen 5 cases of beer, the military forgave him, but the state didn't?
So yeah some felons should have their rights restored
Knew of a Major in the Air Force, that was denied a CCW license, because when he was 18 he had stolen 5 cases of beer, the military forgave him, but the state didn't?
So yeah some felons should have their rights restored
Just odd
625 pound gang member arrested
The guns and drugs will not likely draw a lot of jail time, but now not having a FOID card thats another matter.
The guns and drugs will not likely draw a lot of jail time, but now not having a FOID card thats another matter.
Wednesday, October 13, 2010
Impact Guns is getting a new website
Tuesday, October 12, 2010
Need the 2nd
to protect the 1st
Of course thats what its always been about
Thomas Jefferson quote: The 2nd Ammendent is not important until they try to take it.
Of course thats what its always been about
Thomas Jefferson quote: The 2nd Ammendent is not important until they try to take it.
Monday, October 11, 2010
Sunday, October 10, 2010
Friday, October 08, 2010
Pack of 1911's
L-R S&W PD1911, S&W Pro Series 9mm, Springfield Nite 45 Esmeralda Grips, Springfield NM 9mm Rassco Grips, Kimber Custom II Esmeralda Grips, rounding out 2 Kimber Stainless II's 9mm's CT and VZ grips
